IBM IntelliStation E Pro 6836, User Manual

Page: 75 / 156

Note: The illustrations in this document might differ slightly from your hardware.
Note: If you removed the support bracket assembly after you removed the cover,
reinstall it before you install the cover. For support bracket installation
instructions, see “Removing the support bracket assembly” on page 46.
Complete the following steps to install the computer cover.
1. Clear any cables that might impede the replacement of the cover.
2. Install the side cover by placing it into position on the computer. Close the
cover release latch to secure the cover in place.
3. Lock the cover, if required.
4.
If you have not done so already, make sure that the two front stabilizing feet
are rotated outward so that they properly support the computer. Rotate each
individual foot outward 90 degrees.
5. Reconnect the external cables and power cords to the computer; then, plug the
power cords into electrical outlets.
6. Turn on the attached devices; then, turn on the computer.
Installing options in the desktop model
This section provides instructions to help you add options to your desktop
computer. Some option-removal instructions are provided, in case you need to
remove one option to install another. For a list of supported options for your
computer, go to http://www.ibm.com/pc/support on the World Wide Web.
Removing the computer cover
The following information describes how to remove the computer cover.
Chapter 5. Installing options
59