IBM IntelliStation E Pro 6836, User Manual

Page: 64 / 156

v
PCI expansion slots 1 through 5 are on PCI bus 0 . The system scans the AGP
slot and PCI slots 1 through 5 to assign system resources; then, the system starts
(boots) the PCI devices in the following order, if you have not changed the
default boot sequence : PCI slots 1 and 2, system board integrated drive
electronics (IDE) or SCSI devices, and then PCI slots 3 through 5.
Note: To change the boot sequence for PCI devices, start the
Configuration/Setup Utility program, select
Start Options from the main
menu, select Startup Sequence ; then, select Second device (SCSI) to
designate the adapter boot sequence. See “Chapter 4. Configuring your
computer” on page 27 for details on using the Configuration/Setup
Utility program.
v
For a list of supported options for your computer, refer to
http://www.ibm.com/pc/support on the World Wide Web.
Installing an adapter
Complete the following steps to install an adapter.
Adapter
retaining
bracket
Expansion
slot cover
Adapter
support
bracket
Adapter
Attention: When you handle ESD-sensitive devices, take precautions to avoid
damage from static electricity. For details on handling these devices, see “Handling
static-sensitive devices” on page 38.
1. Review the safety precautions listed in “Safety information” on page 39.
2.
Remove any media (diskettes, CDs, or tapes) from the drives and shut down
your operating system.
3. Turn off the computer and attached devices and disconnect all external cables
and power cords; then, remove the side cover. For more information about
removing the side cover, see “Removing the side cover” on page 45.
4. Determine which PCI expansion slot you will use for the adapter.
48
IBM
®
IntelliStation
®
E Pro: User’s Guide IntelliStation E Pro Types 6836, 6846