IBM IntelliStation E Pro 6836 User Manual Download Page 61

Page: 61 / 156

towards the computer, so they do not break off due to the weight of the computer.

When you are finished installing options and have reinstalled the side cover, turn
the two front stabilizing feet a quarter turn out from the computer and set it
carefully back on its feet.

Removing the side cover

The following information describes how to remove the side cover.

Note:

The illustrations in this document might differ slightly from your hardware.

Key lock

Cover-release
latch

Complete the following steps to remove the side cover of the computer.

Chapter 5. Installing options

Summary of Contents for IntelliStation E Pro 6836





























































































































































Search results

Summary of Contents for IntelliStation E Pro 6836

Reviews:

Related manuals for IntelliStation E Pro 6836

Brands by name

Popular brands

IBM IntelliStation E Pro 6836, User Manual

Search results

Summary of Contents for IntelliStation E Pro 6836

Reviews:

Related manuals for IntelliStation E Pro 6836

Brands by name

Popular brands