31
Enhanced:
[
On
, Off]
Normally, the terminal responds to a set of commands that correspond to the
emulation selected. When Enhanced mode is
on
, the set of commands is
extended to those printed in boldface in the Programming chapter.
EIA Data Format:
[7/1/N, 7/1/O, 7/1/E, 7/1/M, 7/1/S, 7/2/N, 7/2/O, 7/2/E, 7/2/M, 7/2/S,
8/1/N
, 8/1/O,
8/1/E, 8/1/M, 8/1/S, 8/2/N, 8/2/O, 8/2/E, 8/2/M, 8/2/S]
Select a data bits/stop bits/parity combination which matches the data
format of the primary host or printer. Parity abbreviations are: O = odd, E =
even, S = space, M = mark, and N = none.
AUX Data Format:
[7/1/O, 7/1/E, 7/1/M, 7/1/S, 7/2/N, 7/2/O, 7/2/E, 7/2/M, 7/2/S,
8/1/N
, 8/1/O, 8/1/E,
8/1/M, 8/1/S, 8/2/N]
Select a data bits/parity bits/stop combination which matches the data
format of the secondary host or printer. Parity abbreviations are: O = odd, E
= even, S = space, M = mark, and N = none.
Language:
[
U.S.
, U.K., Danish, Finnish, French, German, Norwegian, Portuguese, Spanish, Brazilian,
Swedish, Dutch, Belgian-Flemish, Fr-Canadian, Italian, Latin American, Swiss-French, Swiss-German,
Turkish, Greek, Hungarian, Czech, Slovak, Polish, Rumanian, Slovenian, Croatian, Bosnian, Serbian
Latin, Russian, Hebrew]
Select the language type which matches your keyboard’s layout.
Sessions:
[
One
, Two]
Select the number of sessions that the terminal will run. One session is
required per connection to a host. When two sessions are selected, the
Setup menu will display the message “Press
Ctrl-Enter (Kpd)
to Toggle Sessions”
at the bottom of the screen. The current session is displayed at the upper
left corner of the status line (either by a SES1 or SES2 indicator). To change
the active session, press
Ctrl
and
Enter
(on the numeric keypad)
simultaneously.
Host/Printer:
[EIA/Aux,
EIA
/
Para
, EIA/None, Aux/EIA, Aux/Para,
Aux/None,
None/EIA, None/Aux,
None/Para, None/None]
The first part of the selection indicates the host (either the EIA port or the
AUX port) and the second part of the selection indicates the printer port (if a
serial printer is used, either the EIA or Aux port can be used to connect to
the printer, but if a parallel printer is being used, the PAR port should be
used.) The active session “drives” the printer. EIA/Para is the default for
session 1, and Aux/None is the default for session 2.
