70
NOTE TO INSTALLER
This equipment complies with the FCC Regulation for Class A devices,
Subpart J of Part 15. Shielded, grounded interface cables were used on all
ports for FCC radiated emission testing.
The manufacturer is not responsible for any violation of the FCC Regulation
for Class A devices that is caused by unauthorized modification of the
equipment, or caused by equipment installation not in accordance with the
instructions in this manual.
This equipment generates, uses, and can radiate radio frequency energy and
may cause radio or television interference. All user equipment that interfaces
with other products should be connected with shielded cables. (Contact a
local dealer for more information on shielded cable assemblies and their
availability.)
There is no guarantee that interference will not occur. If radio or television
interference occurs (this can be determined by turning the equipment off and
on while the radio or television is on), the user is solely responsible for
correcting the interference and is encouraged to take one or more of these
measures:
1.
Reorient the receiving antenna.
2.
Relocate the equipment, or move the equipment away from the
receiver.
3.
Plug the equipment into a different outlet so the unit and receiver
are on different branch circuits.
4.
Consult the dealer or an experienced radio/television technician.
It is also suggested that the user read the FCC booklet entitled How to
Identify and Resolve Radio-TV Interference Problems. The booklet is
available from the U.S. Government Printing Office, Washington, D.C.
20402. (When ordering the booklet, specify stock number 04-000-00345-
4.)
Site Preparation
The screen display geometry on terminal products is aligned using
magnetic devices. External magnetic fields created by other types of
electronic equipment, such as printers, in very close proximity to the
terminal, may cause minor display distortion.
Examples of display distortion include:
§
Shaky video
§
Wavy lines
§
Tilted display
This magnetic field interaction only occurs over a very short distance,
normally less than twelve inches, and can be corrected by separating the
equipment and/or slightly reorienting the display.
