42
HOST: F7
Break:
[
250 ms
, 170 ms, 500 ms, Off]
Choose the duration of the break signal in milliseconds. This is an
interruption in data flow, and can be disabled.
Modem Control:
[On,
Off
]
If a modem is being used to communicate with the primary or secondary
host, modem control should be on. To perform a disconnect, the terminal
drops the DTR signal. In full duplex, the terminal keeps RTS high and
checks for a CD signal before sending data to the modem. In half duplex, it
raises RTS and awaits a clear-to-send (CTS) signal from the modem before
sending data.
Disconnect:
[
2sec
, 60ms]
Select the maximum time period that the modem can be disconnected (or the
modem line be down) before the terminal performs a Modem Disconnect.
This occurs if “EIA (Aux) Modem Control” is
on
.
Comm Mode:
[
Full Duplex
, Half Duplex, Full Block, Half Block]
Select the communications mode.
Half-duplex is not available when KeyMode is
ScanCode
.
Receive <CR>:
[
<CR>
,
<CR><LF>]
Select the way in which carriage returns received will be interpreted.
Receive <DEL>:
[
Ignore
, Destruct <BS>]
Choose to ignore the DEL control code (7Fh) when received or to treat it as a
Destructive Backspace code.
Send ACK:
[Off,
On
]
Decide whether the terminal should respond to inquiry (05h) or when certain
terminal functions are performed (configuring the EIA (Aux) ports, splitting
screen, etc.) with the ACK (06h) character.
Null Suppress:
[
On
, Off]
In the default mode, the host ignores all received nulls (00 hex). When
off
is
selected, the terminal will accept all received nulls, and act upon them
according to the selected emulation.
Send Line Term:
[
<US>
, <CR><LF>]
Select which line terminator is sent. <US> is 1Fh and <CR><LF> is 0Dh
0Ah.
