IBM Infoprint 1422 User Manual Download Page 53

Page: 53 / 178

Clearing jams

Print media

23x Paper Jam, Check Duplex

This message appears only when the printer is uncertain about the location of the duplex jam.

To clear this type of jam:

Pull Tray 1 completely out.

Look under the printer on the left side to locate a green lever.

Push down on the green lever.

Look for the jam. If it is not visible from the front, continue with

step 6

Gently pull the jam toward you.

Note: If the jam does not come out easily, continue with

step 6

Open the rear door and clear any jams. If you are unable to clear the jam from here, continue
with

step 7

Look under the back of the printer on the right side to locate a green lever.

Lever

Summary of Contents for Infoprint 1422



















































































































































































Search results

Summary of Contents for Infoprint 1422

Reviews:

Related manuals for Infoprint 1422

Brands by name

Popular brands

IBM Infoprint 1422, User Manual

Search results

Summary of Contents for Infoprint 1422

Reviews:

Related manuals for Infoprint 1422

Brands by name

Popular brands