IBM Infoprint 1422 User Manual Download Page 137

Page: 137 / 178

Removing options

135

Supplies and maintenance information

Removing an optional memory card

Complete the following steps to remove an optional printer memory card.

Warning:

Optional memory cards are easily damaged by static electricity. Touch something
metal on the printer before you touch an optional memory card.

Remove the shield. See

Accessing the system board

Locate the optional memory card.

Push the connector latches on both ends of the memory connector away from the memory
card.

Pull the memory card straight out of the memory connector.

Place the memory card in its original packaging, or wrap it in paper and store it in a box.

Reinstall the shield. See

Reinstalling the shield

Summary of Contents for Infoprint 1422



















































































































































































Search results

Summary of Contents for Infoprint 1422

Reviews:

Related manuals for Infoprint 1422

Brands by name

Popular brands

IBM Infoprint 1422, User Manual

Search results

Summary of Contents for Infoprint 1422

Reviews:

Related manuals for Infoprint 1422

Brands by name

Popular brands