IBM Infoprint 1422 User Manual Download Page 39

Page: 39 / 178

Loading and using the multipurpose feeder

Print media

•

Load transparencies with the recommended print side face up and the top edge going in first.

Warning:

Never use envelopes with clasps, snaps, windows, coated linings, or self-stick
adhesives. These envelopes may severely damage the printer.

•

Load envelopes with the flap side down and the stamp area going in last.

Note: For best results, peel-and-stick envelopes should exit to the rear output bin. Open

the rear output bin when printing on these envelopes.

Do not feed stamped envelopes. The stamp and addresses are shown for envelope
orientation only.

Summary of Contents for Infoprint 1422



















































































































































































Search results

Summary of Contents for Infoprint 1422

Reviews:

Related manuals for Infoprint 1422

Brands by name

Popular brands

IBM Infoprint 1422, User Manual

Search results

Summary of Contents for Infoprint 1422

Reviews:

Related manuals for Infoprint 1422

Brands by name

Popular brands