IBM Infoprint 1422 User Manual Download Page 119

Page: 119 / 178

Using MarkVision to manage the printer

117

Software and network tasks

Using MarkVision to manage the printer

To understand how MarkVision can help you manage the printer, refer to the drivers CD.

Using Hex Trace mode

When unexpected characters print or characters are missing, use Hex Trace to help you determine if
the language interpreter or the cable has a problem. Hex Trace isolates printing problems by telling
you what information your printer is receiving.

Make sure the printer is on and the

Ready

message appears.

Press and release Menu until you see

Utilities Menu

, and then press Select.

Press and release Menu until

Hex Trace

appears, and then press Select.

To exit Hex Trace mode, select

Reset Printer

from the Job Menu or turn the printer off and then

back on.

Summary of Contents for Infoprint 1422



















































































































































































Search results

Summary of Contents for Infoprint 1422

Reviews:

Related manuals for Infoprint 1422

Brands by name

Popular brands

IBM Infoprint 1422, User Manual

Search results

Summary of Contents for Infoprint 1422

Reviews:

Related manuals for Infoprint 1422

Brands by name

Popular brands