IBM FC 2704, Installation Instructions Manual

Page: 39 / 56

10.5.2 Installing the cables for the model 7050 server
See Figure 26 for model 7050 connector locations and cabling.
▌1▐
Power brick
▌8▐
Port 1 to USB-C to USB extension cable, to Ethernet
adapter (INT/172.31.1.X)
▌2▐
Port 3 to USB extension cable, keyboard
▌9▐
Port 5 to Ethernet adapter (AOTM)
▌3▐
Port 4 to USB optical drive
▌10▐
Ethernet for AOTM
▌4▐
Power connector to power brick
▌11▐
Ethernet for broadband call home/remote support
▌5▐
Video connector to VGA extension cable
▌12▐
Ethernet for attached subsystem (INT/172.31.1.X)
▌6▐
USB port to serial adapter cable
▌13▐
USB extension cable, keyboard
▌7▐
Port 2 to Ethernet adapter (EXT CALL HOME)
▌14▐
VGA extension cable, video
Note: Ensure that the TSSC tray assembly is fully extended at the front of the rack before routing the
cables through the cable management arm.
__ 1.
Verify that all existing cable connections are attached as shown in Figure 26.
a14or736
Port 1
INT/
172.31.1.X
INT/
172.31.1.X
Port 3
KEY BRD
Power
Port 4
DVD DRV
Port 5
AOTM
AOTM
EXT
CALL HOME
Port 2
EXT/CALL
10
2 3
3 2
4
7 8
9
11
12
13
14
1
6
6
5
9
Figure 26. TSSC connectors and cabling (model 7050)
Installation (Sections 9 through 12)
33