IBM FC 2704, Installation Instructions Manual

Page: 33 / 56

Tip: In some cases, the rack has equipment above and below the specific U space designated for
the console. In that case, on a large table, you can install the console on the slide-rail, install the
brace rail cable management arm, attach the cable management arm to the console and route the
cables through the cable management arm. At this point, it is recommended that two people pick
up the assembly and slide it in the 1U space from the front. Next, snap the front rails into
position and then repeat on back side.
Installation (Sections 9 through 12)
27