IBM FC 2704, Installation Instructions Manual

Page: 40 / 56

__ 2. Install the Redundant AC Power using the installation instructions for FC 1904 (Redundant AC
Power for 3952-F05). Return to this procedure once FC 1904 has been completed.
Note: The FC 1904 II has a wiring diagram for the power connections.
Note: All cables should be routed through the cable management arm.
__ 3. Connect the VGA extension cable to the video connector
▌5▐
on the TSSC and connect the video
cable from the monitor to the VGA extension cable
▌14▐
.
__ 4. Connect the USB extension cable to Port 3
▌2▐
on the TSSC and the keyboard/mouse USB cable to
the USB extension cable
▌13▐
.
__ 5. Connect the USB-C to USB extension cable to Port 1
▌8▐
on the TSSC. And connect the extension
cable to the Ethernet adapter cable
▌12▐
.
__ 6. Connect the serial adapter cable (not shown) to the USB port
▌6▐
on the TSSC and connect the
serial cable to the serial adapter cable.
__ 7. Connect the AOTM
▌10▐
, External
▌11▐
, and Internal
▌12▐
Ethernet connections as shown in
Figure 26 on page 33.
34
FC 2704, 2725, 2748, & 5512