IBM FC 2704, Installation Instructions Manual

Page: 34 / 56

10.4 Installing the 26-port Switch and Baffle - FC 2704
26-port switch installation:
The 26-port switch uses 1U in the frame and 2U for installation.
__ 1. See Figure 23. Install the side rails
▌1▐
along with item
▌6▐
on the frame where the switch will be
installed. Secure with four screws
▌7▐
as shown in EIA positions 33 and 34.
__ 2. Assemble the mounting brackets
▌2▐
to the 26-port switch
▌5▐
using the eight M3 X 6 screws
▌3▐
.
__ 3. Mount the bracket and switch assembly to the frame using the two M5 X 14 screws
▌4▐
at EIA
position 33 .
__ 4. Connect the power cable to the 26-port switch. Push the other end of the power cable through the
hole on the side of the mounting bracket and out the back of the frame.
1
5
4
3
2
a69m0791
6
7
Figure 23. Installing the 26-port switch (Rear of frame view)
28
FC 2704, 2725, 2748, & 5512