2. Carefully lay the blade server down on a flat, non-conductive surface, with the
cover side up.
3. Press the blade-cover release on each side of the blade server and lift the
cover open, as shown in the illustration.
4. Lay the cover flat, or lift it from the blade server.
Statement 21
CAUTION:
Hazardous energy is present when the blade server is connected to the power source.
Always replace the blade cover before installing the blade server.
Closing the blade server cover
This section describes how to close the blade server cover, as illustrated in
Figure 15.
Important:
The blade server cannot be inserted into the BladeCenter unit until the
cover is installed and closed or an expansion unit is installed. Do not
attempt to override this protection.
Note:
The illustrations in this document might differ slightly from your hardware.
Complete the following steps to close the blade server cover:
1. Read the safety information beginning at Appendix B, “Safety information,” on
page 97 and “Installation guidelines” on page 27.
2. If you removed the blade bezel assembly, replace it now (see “Installing the
blade server bezel assembly” on page 37).
Cover
pins
Figure 15. Closing the blade server cover
Chapter 5. Customer replacement units
35
Summary of Contents for eServer BladeCenter HS20 Type 8832
