IBM eServer BladeCenter HS20 Type 8832, Maintenance And Troubleshooting Manual

Page: 53 / 158

Lever closed
Figure 21. Microprocessor locking lever in the closed position
Lever closed
Lever
fully
open
Figure 22. Microprocessor locking lever in the fully open position
Lever
fully
open
d. Center the microprocessor over the microprocessor socket. Align the
triangle on the corner of the microprocessor with the triangle on the corner
of the socket and carefully press the microprocessor into the socket.
Attention:
v Do not use excessive force when pressing the microprocessor into the
socket.
v
Make sure that the microprocessor is oriented and aligned correctly in
the socket before you try to close the lever.
e. Carefully close the lever to secure the microprocessor in the socket.
9. Install a heat sink on the microprocessor:
a. Remove the plastic protective cover from the bottom of the heat sink.
Chapter 5. Customer replacement units
43