Chapter 5. Installing Options
73
Notes:
1.
Windows NT versions prior to 4.0 do not support VLANs.
2.
VLANs require NT 4.0 with Service Pack 3.0 and the NDIS driver from Microsoft.
3.
In Windows NT, VLANs cannot be implemented on controllers that have been
configured for teaming options. NetWare can support teaming options and VLANs
on the same adapters.
To join a VLAN from Windows NT 4.0:
1.
Create a VLAN on the switch. Use the parameters you assign there to join the
VLAN from the server. Refer to your switch documentation for more information.
2.
Double-click the Network icon in the Control Panel window.
3.
On the Adapters tab, select the adapter you want to be on the VLAN and select
Properties
.
4.
In IBMSet, select
Join VLAN
. Note that VLANs cannot be assigned to adapters
that are already defined to have an adapter teaming option.
5.
Enter the VLAN ID and VLAN name. The VLAN ID must match the VLAN ID of the
switch. The ID range is from 1 to 1000. The VLAN name is for information only
and does not need to match the name on the switch.
6.
Select
Join VLAN
. Repeat steps 3 through 5 for each VLAN you want the server
to join. The VLANs you add are listed on the Adapters tab.
7.
Select
Close
and restart the computer.
Ethernet port connector
The following table and illustration show the pin-number assignments for the RJ-45
connector. These assignments apply to both 10BASE-T and 100BASE-TX devices.
Table 7. Ethernet RJ-45 connector pin-number assignments..
Pin
Signal
Pin
Signal
1
Transmit data+
5
Not connected
2
Transmit data-
6
Receive data -
3
Receive data+
7
Not connected
4
Not connected
8
Not connected
Summary of Contents for eServer 342 xSeries
