Chapter 6. Solving problems
91
00180100
A PCI adapter has requested memory resources that are not available
Action:
1.
If the PCI adapter that is requesting the memory resources is the start (boot)
device, you might need to change the order of the adapters in the PCI slots.
Memory is allocated to devices in the order that is specified in the Boot Priority
option from the Start Options menu in the Configuration/Setup Utility. Ensure that
the adapter is early in the boot priority order so that it is allocated the necessary
memory resources.
2.
Make sure that the PCI adapter and all other adapters are set correctly in the
Configuration/Setup Utility program. If the memory resource settings are not
correct, change the settings.
3.
If all memory resources are being used, you might need to remove an adapter to
make memory available to the PCI adapter. Disabling the adapter BIOS on the
adapter might correct the error. Refer to the documentation provided with the
adapter.
00180200
A PCI adapter has requested an I/O address that is not available, or the PCI adapter might be
defective.
Action:
1.
Make sure that the I/O address for the PCI adapter and all other adapters are set
correctly in the Configuration/Setup Utility program.
2.
If the I/O port resource settings are correct, the PCI adapter might be defective.
Call for service.
00180300
A PCI adapter has requested a memory address that is not available, or the PCI adapter might
be defective.
Action:
1.
Make sure that the memory address for all other adapters are set correctly in the
Configuration/Setup Utility program. If the memory resource settings are not
correct, change the settings.
2.
If the memory resource settings are correct, the PCI adapter might be defective.
Call for service.
00180400
A PCI adapter has requested a memory address that is not available.
Action:
If all memory addresses are being used, you might need to remove an adapter to
make memory address space available to the PCI adapter. Disabling the adapter
BIOS on the adapter might correct the error. Refer to the documentation provided with
the adapter.
00180500
A PCI adapter ROM error occurred.
Action:
Remove the PCI adapters. If you can start the server without the adapters, reinstall
each adapter one at a time and retest after each is reinstalled. When an adapter fails,
replace it.
If you cannot isolate and correct the problem, call for service.
00180600
A PCI-to-PCI bridge error occurred. More than one PCI bus tried to access memory below
1 MB.
Action:
Remove the PCI adapter that has the PCI bridge. If you can start the server without
the adapter, reinstall and retest the adapter. If the adapter fails, replace it.
If you cannot isolate and correct the problem, call for service.
00180700
xxxxyyyy
Planar PCI device does not respond or disabled by user. (Where
xxxx
is the PCI
vendor ID and
yyyy
is the PCI device ID.)
Action:
Start the Configuration/Setup Utility program, select Devices and I/O Ports, and make
sure that the device is enabled. If the problem remains, call for service.
POST message
Description
Table 13. POST error messages.
Summary of Contents for eServer 342 xSeries
