IBM CS821, Service Manual

Page: 55 / 118

c. If the riser contains a GPU, replace the power cable (A) into the system backplane as shown in
Figure 44.
d. Place the PCIe adapter riser and the cards it contains into the system backplane as shown in
Figure 45 on page 40.
1) Ensure that the PCIe holder release pins (B) are retracted, so the arrows point into the system.
2) Use the alignment pins (A) and slots to help you properly insert the riser cards and replace the
cover
3) Reset the retaining pins to secure the PCIe cage.
Figure 43. Inserting an adapter into position 4 or 5 of the riser
Figure 44. Plugging the GPU power cable
Removing and replacing parts
39