IBM Aptiva 2159, Manual

Page: 71 / 214

Table 2-1 (Page 10 of 25). POST and Diagnostics Index for
Symptoms, Messages, Error Codes, or Beeps
Symptoms, Messages, Error
Codes, or Beeps Action/FRU
Not ready.
Printer not on-line or not ready. Ready Printer
Printer
Printer Cable
System Board
No 'type-amatic' repeat.
At least one repeat key must be
tested during this test or an error
will occur. Type-amatic test
error. Keyboard
System Board
Not used by any standard
device.
IRQ is not currently being used
by a non-standard device. System Board
Numeric Proc Failed.
NPU test error. Processor
System Board
Parallel Port Failed.
Test Report Summary message. System Board
Parallel port or serial port failure
(system board port). “Diagnostics Device Presence Test” on
page 2-43.
Test using a wrap plug while running
Diagnostics.
Cable/connections
System board
Pass (N): ** Errors ** Drive (X)
Failed.
Diskette drive read/write test
error. Diskette Drive
Access Station host card
Access Station client card
Access Station cable
System Board
Diskette Drive Cable
Pass (N) Drive Not Ready.
Diskette drive door is open or
defective. Ensure diskette drive is ready.
Diskette Drive
Access Station host card
Access Station client card
Access Station cable
System Board
Diskette Drive Cable
Check Procedures
2-19