IBM Aptiva 2159, Manual

Page: 97 / 214

010 (continued)
Ÿ
Check all adapter card cables and connectors for proper installation.
Ÿ
Make sure all of the above are set correctly and show the correct
voltages and continuity. Replace any defective cables or adapter
cards. See “Power Supply” on page 2-35 and “System Board Layout”
on page 5-2.
– Run the Easy Test Diagnostics test again.
– If an error or other symptom is displayed, go to “Index of Symptoms,
Messages, Error Codes, or Beeps” on page 2-9.
– If no error can be detected or the symptom is intermittent, go to
“Undetermined Problem” on page 2-69.
Check Procedures
2-45