IBM Aptiva 2159 Page 123 Manual Download

Page: 123 / 214

service manual or a device not supported by IBM diagnostic tests.

If all devices and adapters have been removed, and the problem remains:

1. Remove all cables from connectors on the system board except the

power supply and switch cables. See and “System Board Layout” on
page 5-2 for connector locations.

2. Remove all SIMMs from sockets.

3. Power-on the system unit and listen for any beeps.

4. If there are beeps, replace the system board and use the current

processor on the FRU system board.

5. If there are no beeps, replace the processor and use the current system

board.

6. If there are still no beeps, replace the current system board and use the

FRU processor obtained in step 5.

Check Procedures

2-71

Summary of Contents for Aptiva 2159























































































































































































































Search results

Summary of Contents for Aptiva 2159

Reviews:

Related manuals for Aptiva 2159

Brands by name

Popular brands

IBM Aptiva 2159, Manual

Search results

Summary of Contents for Aptiva 2159

Reviews:

Related manuals for Aptiva 2159

Brands by name

Popular brands