IBM 9514-B03, Installation Manual

Page: 40 / 58

The Manual-Adjust Menu
You can run the following functions from the manual-adjust menu.
Decreasing the noise, such as the noise on the screen
Adjusting the hue
Adjusting the display position and size on the screen
You can reduce the noise and vertical stripes on the screen by adjusting the
PHASE and CLOCK parameters, respectively. Normally, you do not need to
use the manual-adjust menu, since its parameters are set to optimum default
values in auto setup.
Using the Manual-Adjust Menu
1
Push and hold one of the brightness control ( ) buttons. The
following menu is displayed:
2
Use one of the brightness control ( ) buttons to select an item, and
use one of the contrast ( ) buttons to set the values for that item.
Adjust CLOCK to reduce the vertical stripes.
3
Adjust PHASE to reduce the noise on the screen.
4
Adjust the display position with H-POSI and V-POSI, which are on a
subsequent menu.
5
When you have specified the settings in the manual-adjust menu, select
SAVE VALUES. Push one of the contrast (
) buttons to store the
values.
6
Push the setup switch on the bottom of the monitor to exit the menu.
30