IBM 8647 - Eserver xSeries 225, Maintenance And Troubleshooting Manual

Page: 111 / 182

Rear-adapter retainer
Before you begin:
v
Read “Safety information” on page 131
v
Review the information in “System reliability considerations” on page 37
To remove the rear-adapter retainer, complete the following steps:
1. Turn off the server, if it is on.
2. Unplug the server, and disconnect the power cord; then, disconnect all external
cables.
3. Remove the side cover. See “Removing the side cover” on page 41
4. Rotate the rear-adapter retainer to the open position.
5. Grasp the rear-adapter retainer, and gently slide the top and bottom tabs out of
the notches.
To replace the rear adapter retainer, reverse the steps.
Chapter 5. Field replaceable units
101