IBM 8335-GTG Handbook Download Page 41

Page: 41 / 70

Table 13. Top view locations
Index number

FRU description

FRU removal and replacement

procedures

Disk drive and fan card

• Removing and replacing the

disk drive and fan card in the

8335-GTC

• Removing and replacing the

disk drive and fan card in

the8335-GTG or 8335-GTH

• Removing and replacing the

disk drive and fan card in the

8335-GTW or 8335-GTX

Time-of-day battery

See Removing and replacing the

time-of-day battery in the 8335-

GTC, 8335-GTG, 8335-GTH,

8335-GTW, or 8335-GTX.

System backplane

• Removing and replacing the

system backplane in the 8335-

GTC

• Removing and replacing the

system backplane in the 8335-

GTG or 8335-GTH

• Removing and replacing the

system backplane in the 8335-

GTW

• Removing and replacing the

system backplane in the 8335-

GTX

CPU 0

See Removing and replacing a

system processor module in the

8335-GTC, 8335-GTG, or 8335-

GTH or Removing and replacing a

system processor module in the

8335-GTW or 8335-GTX.

CPU 1

GPU 0

See Removing and replacing a

graphics processing unit in the

8335-GTC, 8335-GTG, or 8335-

GTH or Removing and replacing a

graphics processing unit in the

8335-GTW or 8335-GTX.

GPU 1

GPU 2
Note: 8335-GTC, 8335-GTG, and

8335-GTH systems do not

support this location.

GPU 3

GPU 4

GPU 5
Note: 8335-GTC, 8335-GTG, and

8335-GTH systems do not

support this location.

Finding parts and locations 27

Summary of Contents for 8335-GTG







































































Search results

Summary of Contents for 8335-GTG

Reviews:

Related manuals for 8335-GTG

Brands by name

Popular brands

IBM 8335-GTG, Handbook

Search results

Summary of Contents for 8335-GTG

Reviews:

Related manuals for 8335-GTG

Brands by name

Popular brands