IBM 7944 Installation And User Manual Download Page 3

Page: 3 / 150

Contents

Contents . . . . . . . . . . . . . . . . . i

Safety . . . . . . . . . . . . . . . . . . iii

Safety statements . . . . . . . . . . . . . . . iv

Chapter 1. The Lenovo System
x3550 M3 server . . . . . . . . . . . . . 1

The IBM Documentation CD . . . . . . . . . . . 3

Hardware and software requirements . . . . . 3
Using the Documentation Browser . . . . . . 3

Related documentation .  .  .  .  .  .  .  .  .  .  .  .  .  4
Notices and statements in this document .  .  .  .  .  .  5
Features and specifications .  .  .  .  .  .  .  .  .  .  .  5
What your server offers .  .  .  .  .  .  .  .  .  .  .  .  .  8
Reliability, availability, and serviceability .  .  .  .  .  12
IBM Systems Director .  .  .  .  .  .  .  .  .  .  .  .  13
The Update

Xpress

System Pack Installer . . . . . 13

Server controls, LEDs, and power. . . . . . . . 14

Front view .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  14
Operator information panel .  .  .  .  .  .  .  .  15
Light path diagnostics panel .  .  .  .  .  .  .  .  16
Rear view .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  24
System pulse LEDs .  .  .  .  .  .  .  .  .  .  .  29
Server power features .  .  .  .  .  .  .  .  .  .  30

Chapter 2. Installing optional
devices . . . . . . . . . . . . . . . . . 33

Instructions for IBM Business Partners .  .  .  .  .  .  33
How to send DSA data .  .  .  .  .  .  .  .  .  .  .  .  33
Server components .  .  .  .  .  .  .  .  .  .  .  .  .  33

System-board internal connectors.  .  .  .  .  .  35
System-board external connectors .  .  .  .  .  35
System-board switches and jumpers.  .  .  .  .  36
System-board LEDs .  .  .  .  .  .  .  .  .  .  .  39
System-board optional device connectors .  .  40

Installation guidelines . . . . . . . . . . . . 41

System reliability guidelines .  .  .  .  .  .  .  .  42
Working inside the server with the power on .  .  43
Handling static-sensitive devices .  .  .  .  .  .  43

Internal cable routing and connectors .  .  .  .  .  .  44
Removing the cover .  .  .  .  .  .  .  .  .  .  .  .  .  48
Removing the DIMM air baffle .  .  .  .  .  .  .  .  .  49
Removing the microprocessor 2 air baffle.  .  .  .  .  50
Installing a memory module .  .  .  .  .  .  .  .  .  .  51

DIMM installation sequence . . . . . . . . 54
Memory mirroring . . . . . . . . . . . . 54

Online-spare memory. . . . . . . . . . . 56
Installing a DIMM . . . . . . . . . . . . 57

Installing drives . . . . . . . . . . . . . . . 58

Installing a hot-swap hard disk drive .  .  .  .  .  58
Installing a simple-swap hard disk drive .  .  .  59
Installing an optional DVD drive .  .  .  .  .  .  .  61

Replacing a PCI riser-card assembly . . . . . . 64
Installing an adapter . . . . . . . . . . . . . 66
Replacing a PCI Express assembly with a PCI-X

assembly . . . . . . . . . . . . . . . . . 68
Replacing a PCI-X assembly with a PCI Express

assembly . . . . . . . . . . . . . . . . . 69
Installing a ServeRAID SAS/SATA controller on the

SAS/SATA RAID riser card . . . . . . . . . . 70
Installing an optional ServeRAID adapter advanced

feature key.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  73
Installing a hot-swap fan assembly .  .  .  .  .  .  .  75
Installing a hot-swap ac power supply .  .  .  .  .  .  76
Installing a USB embedded hypervisor flash

device .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  80
Installing the virtual media key .  .  .  .  .  .  .  .  .  80
Installing the optional two-port Ethernet adapter .  .  81
Installing a RAID adapter battery remotely in the

server.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  84
Installing the DVD enablement kit .  .  .  .  .  .  .  .  89
Installing a SAS/SATA 4 Pac HDD option .  .  .  .  .  92
Installing a second microprocessor and heat

sink . . . . . . . . . . . . . . . . . . . 94

Thermal grease . . . . . . . . . . . . . 99

Completing the installation . . . . . . . . . . 100

Installing the microprocessor 2 air baffle .  .  .  100
Installing the DIMM air baffle .  .  .  .  .  .  .  .  101
Installing the cover .  .  .  .  .  .  .  .  .  .  .  .  101
Connecting the cables .  .  .  .  .  .  .  .  .  .  102
Updating the server configuration .  .  .  .  .  .  103

Chapter 3. Configuring the
server . . . . . . . . . . . . . . . . . 105

Using the Setup utility . . . . . . . . . . . . 106

Starting the Setup utility .  .  .  .  .  .  .  .  .  .  106
Setup utility menu choices .  .  .  .  .  .  .  .  .  107
Passwords .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  109

Using the Boot Manager program . . . . . . . . 111
Starting the backup server firmware . . . . . . . 111
Using the ServerGuide Setup and Installation

CD . . . . . . . . . . . . . . . . . . . . 111

ServerGuide features . . . . . . . . . . . 112
Setup and configuration overview . . . . . . 112

Summary of Contents for 7944























































































































































Search results

Summary of Contents for 7944

Reviews:

Related manuals for 7944

Brands by name

Popular brands

IBM 7944, Installation And User Manual

Search results

Summary of Contents for 7944

Reviews:

Related manuals for 7944

Brands by name

Popular brands