IBM 7944, Installation And User Manual

Page: 85 / 150

Figure 51. ServeRAID M5000 advanced feature key installation
If you have other devices to install or remove, do so now. Otherwise, go to “Completing the installation” on
page 100 .
Installing a hot-swap fan assembly
Use this information to install a hot-swap fan assembly.
The server comes standard with five dual-motor hot-swap cooling fans.
Attention:
To ensure proper operation, replace a failed hot-swap fan within 30 seconds.
To install an additional hot-swap fan, complete the following steps:
Step 1. Read the safety information that begins on “Safety” on page iii and “Installation guidelines” on page
41 .
Step 2. Remove the cover (see “Removing the cover” on page 48 ).
Step 3. Touch the static-protective package that contains the new fan to any unpainted metal surface on
the server. Then, remove the new fan from the package.
Chapter 2
.
Installing optional devices
75