IBM 7316-TF4 Installing Download Page 64

Page: 64 / 90

4. To attach the outer slide-rail to the rack, complete the following steps.

Note: Install the rear slide-rail bracket to the rear of the rack first; then, install the front slide-rail

bracket to the front of the rack.

a. Holding the slide-rail horizontally, align the rear slide-rail bracket so that the bracket is on the

outside of the rack mounting flanges.

b. Press the rear slide-rail bracket towards the rack flange and then pull it towards the front of the

rack until the locking bracket clicks into place behind the rack flange.

c. Extend the slide-rail and press the front slide-rail bracket towards the rack flange and then push it

towards the rear of the rack until the locking bracket clicks into place behind the rack flange.

50 Power Systems: Installing the 7316-TF4 18.5-Inch and 7316-TF5 17.3-Inch Flat Panel Rack-Mounted

Monitor and Keyboard

Summary of Contents for 7316-TF4



























































































Search results

Summary of Contents for 7316-TF4

Reviews:

Related manuals for 7316-TF4

Brands by name

Popular brands

IBM 7316-TF4, Installing

Search results

Summary of Contents for 7316-TF4

Reviews:

Related manuals for 7316-TF4

Brands by name

Popular brands