IBM 7316-TF4 Installing Download Page 48

Page: 48 / 90

CAUTION: Pinch hazard. (L012)

4. Fully extend the console unit out of the rack.
5. Lift the front of the flat-panel display and raise the display to the full upright position.

6. Remove the old keyboard from the console unit.
7. Unpack the replacement keyboard.

Note: Do not extend the keyboard feet. The flat-panel display screen might be damaged if the feet is

extended when the display is closed.

8. Hold the new keyboard near the keyboard tray and carefully route the keyboard-and-mouse cable

down through the keyboard tray cutout and up through the cutout that is behind the flat-panel

display. (See the illustration.) Carefully pull the cable through the cutouts.

34 Power Systems: Installing the 7316-TF4 18.5-Inch and 7316-TF5 17.3-Inch Flat Panel Rack-Mounted

Monitor and Keyboard

Summary of Contents for 7316-TF4



























































































Search results

Summary of Contents for 7316-TF4

Reviews:

Related manuals for 7316-TF4

Brands by name

Popular brands

IBM 7316-TF4, Installing

Search results

Summary of Contents for 7316-TF4

Reviews:

Related manuals for 7316-TF4

Brands by name

Popular brands