IBM 7316-TF4 Installing Download Page 15 | Manualshive

Page: 15 / 90

background image

Installing the 7316-TF4 18.5-Inch Flat Panel Rack-

Mounted monitor and keyboard

Learn how to install the 7316-TF4 18.5-Inch Flat Panel Rack-Mounted Monitor and Keyboard.

Overview of the 7316-TF4 18.5-Inch Flat Panel Rack-Mounted Monitor and

Keyboard

Learn about the 7316-TF4 18.5-Inch Flat Panel Rack-Mounted Monitor and Keyboard.
The IBM 7316-TF4 18.5-Inch Flat Panel Rack-Mounted Monitor and Keyboard is a flat-panel display and

keyboard tray in one unit. The console unit occupies 1U

1

of space in a rack. You can install an optional

console switch behind the standard console in the rack to attach more than one server to the flat-panel

display and keyboard. If firmware and documentation updates are available, you can download them from

the IBM website.
Note: The 1 EIA unit in racks are measured in vertical increments of 1.75 inches each. Each 1.75-inch

increment is called an “EIA.” In some countries, the same increment may be referred to as a “U.”

Console features

Learn about the 7316-TF4 and 7316-TF5 18.5-Inch Flat Panel Rack-Mounted Monitor and Keyboard

console features.
The standard console has the following features:
• Mounts on slide-rails in the rack to enable easy movement and storage of the monitor
• Toolless rack installation in the 1U space of IBM rack configurations
• 18.5-inch, 16:9 ratio LCD panel with a VGA connection to the server or KVM switch
• Support for widescreen and previous (through scaling) resolutions
• Compatible with worldwide power and regulatory requirements
• Cable-management arm comes preinstalled on the rear of the console
• Can be shipped installed in an IBM rack

Check Your Inventory

Find information about the parts shipped along with the 7316-TF4 and 7316-TF5 18.5-Inch Flat Panel

Rack-Mounted Monitor and Keyboard console.
Note: The illustrations in this topic might differ slightly from your hardware.
The console kit contains the following items:
• One console unit with built-in flat-panel display and cable-management arm (A 1 m power cord is

routed along the cable-management arm and is secured with cable straps.)

©

Copyright IBM Corp. 2018, 2020

1

«
...
13
14
15
16
17
...
»

Summary of Contents for 7316-TF4



























































































Reviews:

No comments

Related manuals for 7316-TF4

Brand: NAiS Pages: 208

Brand: Rae Pages: 4

Brand: Daewoo Pages: 93

Brand: Hansol Pages: 8

Brand: V7 Pages: 12

Brand: Daewoo Pages: 72

Brand: Viotek Pages: 20

Brand: Xantrex Pages: 43

Brand: Eizo Pages: 3

Brand: Ikan Pages: 2

Brand: Barco Pages: 74

Brand: Eizo Pages: 76

Gen4 LCD CAPE Series

Brand: 4D systems Pages: 24

Brand: Wohler Pages: 24

PPX-1001 Series

Brand: Daktronics Pages: 4

Brand: Allen-Bradley Pages: 24

Brand: JARLTECH Pages: 48

Brand: SHENZHEN PUMP MEDICAL SYSTEM Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands