IBM 6400i, Setup Manual

Page: 53 / 370

Setting Rear Paper Exit
53
3. Connect the customer supplied interface cable from the host computer to
the appropriate printer interface connector (refer to Figure 27 through
Figure 32).
4. Thread the power cable connector up through the notch in the lower-right
back corner of the cabinet (see Figure 31). Plug the power cord into the
printer AC power connector, then into the AC power outlet.
Figure 27. Internal Back View of the Cabinet Model Showing Interface and Power Cable
Connections
NOTE:
(1)
The Dataproducts adapter feature attaches to the PC
Parallel interface connector.
(2)
Twinax, Coax, and Ethernet Interfaces appear only if these
features are installed.
Power
Switch
AC Power
Connector
AC Power
Cable
Cable-Routing
Notches
I/O Cover
I/O Connector
Host Interface
Connectors
Connect The Interface And Power Cables (Cabinet Models)