IBM 6400i, Setup Manual

Page: 44 / 370

44
Chapter 2
Removing Shipping Restraints (Pedestal Model)
Removing Shipping Restraints (Pedestal Model)
Protective films and foam blocks protect printer mechanisms from possible
damage during shipment. You must remove these shipping restraints before
you operate the printer.
Save the foam blocks with the other packing materials.
To avoid shipping damage, reinstall the shipping restraints whenever the
printer is moved or shipped. To reinstall the shipping restraints, simply
reverse the steps in this section.
Remove the Protective Film and Envelope
Figure 16. Pedestal Model with Cover Open Showing Removal of the Operator Panel
Message Display Protective Film and Sample Configuration Printout Envelope
1. Raise the printer cover.
2. Carefully peel off the tape and lift the protective film off the operator panel
message display.
3. Open the tractor doors.
4. Push the tractor locks down.
5. Slide the tractors outward as far as they will go. The forms thickness lever
should be raised (in the fully open position).
6. Remove the envelope that contains the sample configuration printout.
Store this envelope in a safe place so that you can refer to the
configuration printout.
Envelope
Protective
Film