IBM 6400i, Setup Manual

Page: 314 / 370

314
Appendix D
Attaching Printer to an iSeries Host System
Attaching Printer to Remote Control Unit with Twinax
Interface
iSeries auto configuration program does not support remote attached printers.
You must manually configure this printer as a remote printer attached to a
5294, 5394, or 5494 Remote Control Unit. Use the following parameters when
configuring this printer as a remote printer on iSeries:
NOTE: AFP *Yes can be specified if the level of iSeries supports the printer
as an AFP printer and PSF is installed.
Parameter
Description
Parameter Parameter Setting
Device description DEVD Workstation printer name
Device class DEVCLS *RMT
Device type TYPE *IPDS (When printer is set to 4234-12 mode.)
Device type TYPE 4234 (When printer is set to 4234-2 mode.)
Device model MODEL 0000 (00 if IPDS (4234-12) and 02 if SCS (4234-2))
Type can be set to 6408 or 6412.
CTA for 6408 or 6412 model.
Advanced Function AFP *NO (See Note)
Location Address LOCADR xx
Online at IPL ONLINE *YES
Attached controller CTL Remote controller name
Font identifier FONT yyy (Default font identifier)
Form feed FORMFEED * Cont