IBM 6385 User Manual Download Page 33

Page: 33 / 86

Note:

If this LED is off, it does not mean that no electrical power is present. The

LED might be burned out. To remove all electrical power, you must remove the
system-board tray from the chassis, remove the chassis from the rack, or
disconnect the power cord from the power source.

Hot-swap hard disk drive activity LED:

In some configurations, each hot-swap

hard disk drive has an activity LED. When this LED is flashing, it indicates that the
drive is in use.

Hot-swap hard disk drive status LED:

In some configurations, each hot-swap

hard disk drive has a status LED. When this LED is lit, it indicates that the drive has
failed.

Rear connectors

Power-cord connector:

Connect the power cord to this connector. When the

chassis is installed in an iDataPlex rack, it is automatically connected to power
through a power cord that is mounted to the rack rail.

Chapter 2. Components, features, and controls

Summary of Contents for 6385























































































Search results

Summary of Contents for 6385

Reviews:

Related manuals for 6385

Brands by name

Popular brands

IBM 6385, User Manual

Search results

Summary of Contents for 6385

Reviews:

Related manuals for 6385

Brands by name

Popular brands