IBM 6385 User Manual Download Page 70

Page: 70 / 86

Updating IBM Director

If you plan to use IBM Director to manage the server, you must check for the latest
applicable IBM Director updates and interim fixes.

To install the IBM Director updates and any other applicable updates and interim
fixes, complete the following steps.

Notes:

1. Changes are made periodically to the IBM Web site. The actual procedure might

vary slightly from what is described in this document.

2. To update IBM Director software, you might need to use an external USB

CD-RW/DVD drive such as the IBM and Lenovo part number 73P4515 or
73P4516. See “Firmware updates” on page 57 for additional instructions about
using an external USB CD-RW/DVD drive.

1. Check for the latest version of IBM Director:

a. Go to http://www.ibm.com/systems/management/downloads.html.

b. If a newer version of IBM Director than what comes with the server is shown

in the drop-down list, follow the instructions on the Web page to download
the latest version.

2. Install the IBM Director program.

3. Download and install any applicable updates or interim fixes for the server:

a. Go to http://www.ibm.com/systems/support/.

b. Under

Product support

, click

System x

c. Under

Popular links

, click

Software and device drivers

d. Under

Related downloads

, click

IBM Director

e. Select any applicable update or interim fix that you want to download.

f. Click the file link for the executable file to download the file, and follow the

instructions in the readme file to install the update or interim fix.

g. Repeat steps 3e and 3f for any additional updates or interim fixes that you

want to install.

IBM dx340 User’s Guide

Summary of Contents for 6385























































































Search results

Summary of Contents for 6385

Reviews:

Related manuals for 6385

Brands by name

Popular brands

IBM 6385, User Manual

Search results

Summary of Contents for 6385

Reviews:

Related manuals for 6385

Brands by name

Popular brands