IBM 6385 User Manual Download Page 56

Page: 56 / 86

Reinstalling a system-board tray in a 2U chassis

To reinstall a system-board tray in a 2U chassis, complete the following steps:

1. If an expansion enclosure is installed on the system-board tray, make sure that

the blue air damper actuator is parallel to the system-board tray before you slide
the assembly into the chassis.

2. Slide the system-board tray into the chassis until it stops and the release

handles click into place.

3. Reconnect the cables on the front of the system-board tray.

4. Turn on the system-board tray (see “Turning on the system-board tray” on page

22).

5. Make sure that the power-on LED on the system-board tray operator panel is lit

continuously, indicating that the system-board tray is receiving power and is
turned on.

If you have changed the configuration of the system-board tray, you might have to
update the server configuration through the BIOS configuration utility program (see
“Updating the server configuration” on page 47).

IBM dx340 User’s Guide

Summary of Contents for 6385























































































Search results

Summary of Contents for 6385

Reviews:

Related manuals for 6385

Brands by name

Popular brands

IBM 6385, User Manual

Search results

Summary of Contents for 6385

Reviews:

Related manuals for 6385

Brands by name

Popular brands