IBM 315, Hardware Maintenance Manual Supplement

Page: 54 / 151

pnt0-17 Device fault... Reset initiated!
Explanation: The SunSoft Solaris driver has been reset
due to device fault.
Action: Do the following:
1. Verify that additional IBM PCI Ethernet adapters are
present or replace the PCnet card that fails to
respond.
2. Go to “General Checkout” on page 2.
pnt0-19 IRQ found for PCnet hardware does not
match space.c!
Explanation: This is a warning message referring to the
IRQ found in the system.
Action: Ignore this message if you are sure that this is
what you want to do. Otherwise, run netconfig to match
the hardware settings.
pnt0-19 IRQ found for PCnet hardware does not
match pnt.conf!
Explanation: This is a warning message referring to the
IRQ that the SunSoft Solaris driver found in the system.
Action: Ignore this message if you are sure that this is
what you want to do. Otherwise, run netconfig to match
the hardware settings.
pnt0-20 add_intr_handler failed! Unknown
interrupt type.
Explanation: The IRQ specified or found conflicts with
other devices in the system.
Action: Do the following:
1. Modify the hardware settings.
2. Run netconfig to search for another Ethernet
controller.
pnt0-21 add_intr_handler failed! Out of range
interrupt number.
Explanation: The IRQ specified or found conflicts with
other devices in the system.
Action: Do the following:
1. Modify the hardware settings.
2. Run netconfig to search for another Ethernet
controller.
50
PC Server HMM