IBM 315, Hardware Maintenance Manual Supplement

Page: 32 / 151

Novell NetWare Server ODI Driver
Messages:
This following error messages are for the
Novell NetWare server ODI driver. The explanation and
recommended action are included with each message.
PCNTNW-NW-026 The MSM is unable to parse a
required custom keyword.
Explanation: The user entered an incorrect parameter
keyword.
Action: Enter the keyword correctly. Then, reload the
driver.
PCNTNW-NW-054 The board did not respond to the
initialization command.
Explanation: The board did not respond when the driver
tried to initialize it.
Action: Do the following:
1. Verify that the Ethernet jumper on the system board
is set to the default, enabled position.
2. Go to “General Checkout” on page 2.
PCNTNW-NW-58 The board did not respond to the
initialization command.
Explanation: The IRQ setting might be incorrect with the
hardware setting, or the EEPROM might be corrupted.
Action: Do the following:
1. Verify that the IRQ settings in the NET.CFG file
match the configuration settings in the configuration
programs. See “Resolving Hardware Configuration
Conflicts” on page 77 for information on setting the
interrupt requests.
2. Verify that the EEPROM on the system board is
programmed correctly.
PCNTNW-NW-66 The cable might be disconnected
from the board.
Explanation: The cable might be disconnected from the
server's Ethernet port.
Action: Verify that a cable is connected to the AUI port or
the 10BASE-T port.
28
PC Server HMM