![background image](http://html1.mh-extra.com/html/ibm/2210/2210_installation-and-initial-configuration-manual_3325183047.webp)
Removing the EIA 232 Service Port Feature in Models 14T and 24x
1
Remove the cover from the IBM 2210 as described in “Cover” on page 25.
2
Remove the two screws that secure the EIA 232 Service Port Feature to the
IBM 2210 frame.
3
Remove the Philips-head screw that attaches the middle of the EIA 232
Service Port Feature to the standoff on the system board.
4
Remove the EIA 232 Service Port Feature connection from the system board.
5
Lift the EIA 232 Service Port Feature out of the IBM 2210 chassis.
Installing the 14.4 Kbps Modem Port Feature in Models 14T and 24x
Figure 30. Installing the 14.4 Kbps Modem Port Feature
1
Remove the cover from the IBM 2210 as described in “Cover” on page 25.
2
Remove the blank Service Port faceplate by unscrewing the two screws.
3
Save the faceplate and screws.
4
Insert the 14.4 Kbps Modem Port Feature connection into the connector on
the system board.
5
Attach the 14.4 Kbps Modem Port Feature to the system board by inserting
the alignment post through the top of the modem and screwing in the post.
Appendix A. Installing Options
31
Summary of Contents for 2210
