IBM 2210, Installation And Initial Configuration Manual

Page: 32 / 72

The following terminals are also supported:
¹
IBM 3101 Display Terminal
¹
IBM 3151 ASCII Display Station
¹
IBM 3161 ASCII Display Station
Configure these terminals as shown in “Setup Attributes.”
Setup Attributes
IBM 3101 Setup Attributes
Use Figure 22 to determine the settings for the setup attributes for the IBM 3101
ASCII terminal.
Figure 22. Setup Attributes for the IBM 3101 Display Terminal
The 2210 can use this terminal at all bit rates (in bps) up to 19 200.
IBM 3151 Setup Attributes
Activate setup mode in the IBM 3151 terminal by pressing the Ctrl and Setup keys.
The Ctrl key is located on the lower left of the keyboard. The Setup key is located
on the upper right of the keyboard.
Use Table 4 to help you determine the settings for the setup attributes.
Save the setup information by highlighting the Save function using the cursor keys.
Exit by pressing the Ctrl and Setup keys.
Table 4. Setup Attributes for the IBM 3151
Attribute Setting
Machine Mode 3151
Scroll JUMP
Auto LF OFF
Line Wrap OFF
Operating Mode ECHO
Word Length (bits) 8
Stop Bit 1
Turnaround Character CR
Line Control IPRTS
Break Signal (ms) 500
Send Null Suppress ON
16
2210 Install and Initial Config