IBM 2210, Installation And Initial Configuration Manual

Page: 43 / 72

Reinstalling the Cover
1
Position the IBM 2210 so that the port side is facing you. From this position,
elevate the rear portion of the cover and slide it onto the IBM 2210.
Figure 25. Replacing the Cover
2
Replace the screws that attach the cover and mounting brackets to each side
of the machine. Be sure that the screw with the Phillips head is installed in
the middle hole.
Figure 26. Replacing the Screws and Mounting Bracket
3
If the IBM 2210 was mounted in a rack, return it to the rack.
4
Plug the power cord into the outlet.
Appendix A. Installing Options
27