7-2
701344-003
Problem Determination and Maintenance
System Manager Menu
To utilize the System Manager menus, highlight System Manager Menus on the Offline
Test menu and press the Enter key. If password protection is enabled (see Page 7-5), you
are prompted to enter the password. Enter the password and press the Enter key again.
The System Manager menu is displayed (Figure 7-1, below).
Figure 7-1. System Manager Menu
Basic Assurance Tests
The Basic Assurance Tests selection starts a series of tests running on the display station.
The tests run in a continuous loop until you stop them by pressing the Reset key. To start
the tests, highlight Basic Assurance Tests and press the Enter key. To stop the continuous
tests, press the Reset key again.
These screens are for System Managers and service technicians.
Select one of the following:
Basic Assurance Tests
KBD Test
Mod size Test
Screen Centering
Password
Disabled
Enter Password
Enter Serial #
XXXXXXXX
Init NVRam counters
000 000
KBD Switches
10111111 10111111
Part #
220457-001
Play/Record Option
Full Functions
Reset NVRam
