IBM 10G Network Active Bypass, User Manual

Page: 34 / 56

HA Service
Use the HA Service page to control the segment configuration when the system is used in a
high-availability configuration.
You can use up to two pairs of segments, where one segment in a pair behaves as a secondary (backup)
segment that becomes active if the primary segment fails.
For each pair, the following information is provided:
Table 7. High-availability service settings
Field Description Default
State High-availability for the pair is
enabled or disabled Disabled
Primary Primary segment of the pair, where
traffic usually flows
Secondary Backup segment used if the primary
segment fails
Bond service
Use the Bond Service page to configure a pair of segments in a bond so that their appliance states are
synchronized. If an appliance in a bonded appliance pair fails (and the segment goes into bypass), the
system sets the other appliance in the pair to bypass mode.
For each pair, the following information is provided:
Table 8. Bond service settings
Field Description Default
State Bonding for the pair is enabled or
disabled Disabled
First First segment of the pair
Second Second segment of the pair
16
10G Network Active Bypass V3.4: User Guide