Manual
ibaClock
38
Issue 1.4
10.2
ibaClock - "General" tab
Figure 12: ibaClock
– “General“ tab
Basic settings
Module Type
Display of the module type, cannot be changed.
Locked
True:
the module can be changed by authorized users only.
False: the module can be changed by all users.
Enabled
The data acquisition for this module is either enabled or disabled.
Name
Here you can assign a name for the module.
Time base
Time base for the data acquisition that is used for this module.
Use name as prefix
IF TRUE is selected, the module name is put as prefix in front of the signal name of
this module.
Connection
IP address
The IP address is determined by the slot, the link number of the FOB card and the
device number which is set on the device. ibaPDA sends configuration data and
reads diagnosis data over the TCP/IP connection which is realized in the FO proto-
col. This IP address cannot be changed.
Auto enable/disable
If the value is TRUE, the data acquisition is started even though the device is miss-
ing. The missing device is temporarily disabled in the configuration. During the
