Manual
ibaClock
48
Issue 1.4
ibaClock is not detected
-
Check FO connection
-
FO defect
-
Voltage supply is overloaded
-
Firmware of the ibaFOB-D card is not up-
to-date, D3 is required at least
-
ibaPDA version is not up-to-date, V6.34.0
is at least required
ibaClock is not detected in the Flex
ring
-
ibaClock can not be run in a Flex ring.
The device needs its own link on the
ibaFOB-D card.
13.1
Antenna configuration
If you have not purchased the antenna from iba, it will still be provided with the manufac-
turer’s delivery configuration.
1. Connect the antenna with the Trimble RS-422 to USB converter (included in the
starter kit) and connect these to the PC.
2. Open the Trimble Studio or the Trimble Visual Timing Studio.
3.
Select “New Connection…” in the Connections menu or “GNSS Receiver” in the
drop-
down field “Connect to Device”.
4. In the following dialog, select the device as well as the COM port for the connec-
tion of the antenna. Also set a check mark for “Auto-detect settings” in order to
automatically identify the communication settings.
5. In the monitor dialog, now s
elect “Configure” in the drop-down field “Receiver”.
6.
In the device configuration dialog, switch to the tab “Communication Port”.
a.
Select the receiver port “Port B” in the first drop-down field.
b. Now set the following parameters.
Baud rate: 115200
Parity: Odd
Data Bits: 8
Stop Bits: 1
Protocols:
Input and Output: TSIP
