ibaClock
Manual
Issue 1.4
25
Figure 4: User detection web interface
Default setting for the user credentials:
User name:
admin
Password:
1234
The access should only be available for experienced users to avoid an accidental change
of the settings. An accidental change of the network parameters can e.g. cause that the
access to the device via Ethernet is no longer possible and that the device parameters
have to be reset to the default settings.
Important note
Change the default password directly after commissioning to prevent unauthorized ac-
cess to the configuration.
Permitted signs are numbers and letters in capitalization and lower case.
If you have forgotten the password, you can only change it by a reset to the default set-
tings. Thereby all settings made on the device will get lost.
