I&J7000C Series Operating Manual
Section 5: Point Type & Function Reference
Part # 561978C
Rev. F Dec. 06
- Page
71
-
© 2006 I&J Fisnar Inc.
3.1.3 Move
To use group edit to move addresses 10 – 20 in the current program to memory
addresses 50 – 60:
Instruction Display
Shows
1
Press the
MENU 1
key, then
1
to select
Group Edit
.
The display will prompt the user to enter the
starting memory address of the group to edit
(
From
) and the ending number of the group to edit
(
To
).
GROUP EDIT
FROM:1
TO:1
(1 <-> 1000)
2
Type
10
then press
ENTER
to register 10 in
From
.
Type
20
then press
ENTER
to register 20 in
To
.
GROUP EDIT 10-20
1.Copy 4.Line SP
2.Delete 5.Dispen.TM
3.Move 6.Offset
3
The
Group Edit
menu will then appear, allowing the
user to select an operation to be applied to the
range of points.
Press
3
to select
Move
.
GROUP MOVE
SOURCE 10-20
Destination:1
4
The display will prompt the user to type the
destination memory address where the data will be
moved. Press the backspace key to erase the old
value, then type
50
and press
ENTER
to select
destination memory address number 50.
GROUP MOVE
SOURCE 10-20
Destination:50
1.Yes 2.No
5
The display will now prompt the user to confirm the
move. Press
1
to select
Yes
and move the data.
