65
Server Configureation
The table has one row for each RADIUS server and a number of columns, which are:
Delete: To delete a RADIUS server entry, check this box. The entry will be deleted during the
next Save.
Hostname: The IP address or hostname of the RADIUS server.
Auth Port: The UDP port to use on the RADIUS server for authentication.
Acct Port: The UDP port to use on the RADIUS server for accounting.
Timeout: This optional setting overrides the global timeout value. Leaving it blank will use the
global timeout value.
Retransmit: This optional setting overrides the global retransmit value. Leaving it blank
will use the global retransmit value.
Key: This optional setting overrides the global key. Leaving it blank will use the global key.
Adding a new server
Click to add a new RADIUS server. An empty row is added to the table, and the RADIUS server
can be configured as needed. Up to 5 servers are supported. The button can be used to undo
the addition of the new server.
AAA
To configure a common AAA, in the web interface:
•
Click Configuration / Security / AAA /
•
Click Delete to delete the entry.
•
Click Add New Server to add a new server.
•
Enter Hostname, Port, Timeout and Key
•
Click Apply and click the Save icon in the upper right corner to save the settings or click Reset to cancel. The
Form will return to the previously saved settings.
