![i3 International Cortex S243 User Manual Download Page 119](http://html1.mh-extra.com/html/i3-international/cortex-s243/cortex-s243_user-manual_3165943119.webp)
118
DSCP-Based QoS
This section describes how to use the DSCP-Based QoS mode to configure the basic QoS DSCP based QoS Ingress
Classification settings for all switches.
To configure the DSCP-Based QoS Ingress Classification parameters in the web interface:
Click Configuration / QoS / DSCP-Based QoS
Select to enable or disable the DSCP for Trust
Scroll to select QoS Class and DPL parameters.
Click Apply and click the Save icon in the upper right corner to save the settings or click Reset to cancel. The
Form will return to the previously saved settings.
DSCP-Based QoS Ingress Classification Configuration Parameters:
Items
Description
DSCP
Maximum number of supported DSCP values are 64.
Trust
Click to check if the DSCP value is trusted.
QoS Class
QoS Class value can be any of (0-7).
DPL
Drop Precedence Level (0-3).
QoS DSCP Translation
This section describes how to configure the basic QoS DSCP Translation settings for the switch. DSCP translation can be
done for both Ingress and Egress.
To configure the DSCP Translation parameters in the web interface:
Click Configuration, QoS, DSCP Translation
Scroll to set the Ingress Translate and the Egress Remap DPA and Remap DP1 parameters.
Enable or Disable the Classify setting.
Click Apply and click the Save icon in the upper right corner to save the settings or click Reset to cancel. The
Form will return to the previously saved settings.