IACER S.r.l.
35 di 36 MNPG20 Rev. 03 08/10/10
and eventually replace them (see paragraph “replacing the batteries”). If the problem persists contact
the manufacturer.
•
MIO-PERISTIM doesn’t transmit electric impulses.
Check that the cable jacks have been
inserted in the electrodes and that the plastic protection has been removed from the electrode.
Check that the cables have been connected correctly (connector well inserted in the device). Check
cables and electrodes status (no signs of damage) . If the problem persists contact the manufacturer.
•
MIO-PERISTIM switches off during operation.
Replace the batteries and start the treatment
again. If the problem persist contact the manufacturer.
•
MIO-PERISTIM doesn’t permit to increase output intensity or does not keep the setted
value and resets.
Replace the batteries and start the treatment again. If the problem persists contact
the manufacturer.
Repairing
Every intervention on device must be performed by manufacturer or authorized personnel.
Spare parts
Contact the manufacturer or local distributor for original spare parts.
To preserve product warranty, functionality and product safety we recommend to use only original
spare parts.
Warranty
Refer to National Law or contact the National Distributor for warranty details and terms.
MIO-PERISTIM. All rights reserved. MIO-PERISTIM and the
logos are owned by
I.A.C.E.R Srl and are registered.
